Mürekkep, Yapıştırıcı, Solvent veya Temizleme Sıvısı Teması İçin Kauçuk Merdaneler Nasıl Seçilir?

How to Choose Rubber Rollers for Ink, Adhesive, Solvent, or Cleaning Liquid Contact When a rubber roller works with ink, adhesive, oil, solvent, or cleaning liquid, the first thing to check is the real contact condition. A roller marked as NBR, FKM, silicone, PU, or another rubber type can still behave very differently on the

Mürekkep, Yapıştırıcı, Solvent veya Temizleme Sıvısı Teması İçin Kauçuk Merdaneler Nasıl Seçilir? Devamını Oku »

Isı ve Basınç Teması İçin Kauçuk Merdaneler Nasıl Seçilir?

How to Choose Rubber Rollers for Heat and Pressure Contact A rubber roller used near heat and pressure has to stay stable after the line starts running. Cold hardness, surface feel, or a simple replacement match is not enough for every position. On heated nips, laminating sections, drying-after-contact areas, hot film handling points, coating lines,

Isı ve Basınç Teması İçin Kauçuk Merdaneler Nasıl Seçilir? Devamını Oku »

Şerit (Web) Malzemelerde Tekrarlayan İzler Neden Oluşur?

Why Do Repeat Marks Appear on Web Materials? A repeat mark often shows up after winding, rewinding, slitting, coating, laminating, or final inspection. The web may look normal in some areas, then the same short mark, shadow, dull spot, pressure band, or small surface defect appears again along the roll. For film, paper, foil, nonwoven,

Şerit (Web) Malzemelerde Tekrarlayan İzler Neden Oluşur? Devamını Oku »

Şerit Yönlendirmede Statik Elektrik ve Toz Sorunları

Static and Dust Problems in Web Handling If film, nonwoven, foil, separator film, coated paper, release film, or other clean web materials keep picking up dust, showing small particles, clinging to nearby parts, or running with unstable contact, static should be checked early. In many web handling lines, the problem becomes clear after the web

Şerit Yönlendirmede Statik Elektrik ve Toz Sorunları Devamını Oku »

Kauçuk Merdaneyi Yeniden Kaplamak mı Yenisiyle Değiştirmek mi: Nasıl Karar Verilir?

Re-Cover or Replace a Rubber Roller: How to Decide If you already have an old rubber roller, the first step is not to decide the rubber material. Start with a simpler question: is the old roller still a good base, or should the next roller be made as a new replacement? For some low-speed or

Kauçuk Merdaneyi Yeniden Kaplamak mı Yenisiyle Değiştirmek mi: Nasıl Karar Verilir? Devamını Oku »

Kauçuk Merdane Çatlaması, Şişmesi, Yumuşaması veya Sertleşmesi Genellikle Ne Anlama Gelir?

What Rubber Roller Cracking, Swelling, Softening, or Hardening Usually Means When a rubber roller starts cracking, swelling, softening, hardening, or becoming sticky, the surface is already showing useful evidence. These problems often appear on coating and laminating lines, printing lines, film converting lines, paper converting equipment, acid washing sections, and other roll-to-roll machines where the

Kauçuk Merdane Çatlaması, Şişmesi, Yumuşaması veya Sertleşmesi Genellikle Ne Anlama Gelir? Devamını Oku »