Kauçuk Merdane Bakım Kılavuzu: Temizlik, Depolama, Muayene ve Yüzey Bakımı

Rubber Roller Maintenance Guide: Cleaning, Storage, Inspection and Surface Care Most rubber roller problems start small. A little adhesive is left on the edge after shutdown. A solvent wipe is used every shift because it “cleans faster.” A spare roller sits on its rubber surface for months. A pressure roller stays closed over the weekend.

Kauçuk Merdane Bakım Kılavuzu: Temizlik, Depolama, Muayene ve Yüzey Bakımı Devamını Oku »

Endüstriyel Bir Kauçuk Merdane Ne Kadar Dayanmalıdır?

How Long Should an Industrial Rubber Roller Last? When an industrial rubber roller wears out sooner than expected, the concern is usually practical: is this still normal for this roller position, or has something gone wrong? A shorter service life is not automatically a failure. A roller working under high pressure, strong friction, adhesive contact,

Endüstriyel Bir Kauçuk Merdane Ne Kadar Dayanmalıdır? Devamını Oku »

Film İşleme (Converting) Hatlarında Film Yüzey Kusurları

Film Surface Defects in Converting Lines Fine lines, light marks, scratches, dust spots, coating streaks, and pressure impressions can appear suddenly on film even when the line looks stable. Sometimes the defect is seen only under light reflection. Sometimes it appears after coating, after lamination, near a cleaning point, or only after rewinding. The useful

Film İşleme (Converting) Hatlarında Film Yüzey Kusurları Devamını Oku »

Plastik Levhada Merdane Temasından Sonra Yüzey Çizgilerine Ne Sebep Olur?

What Causes Surface Lines on Plastic Sheet After Roller Contact? Plastic sheet surface lines often appear after the sheet passes a cooling roll, polish roll, traction roller, haul-off roller, or pressure roller. The line may look like a fine stripe, a gloss difference, a light pressure mark, or a repeated mark across the sheet surface.

Plastik Levhada Merdane Temasından Sonra Yüzey Çizgilerine Ne Sebep Olur? Devamını Oku »

Nonwoven Tülbentlerde Neden Basınç İzleri veya Lif Sıkışması Görülür?

Why Do Nonwoven Webs Show Pressure Marks or Fiber Compression? Nonwoven pressure marks often look different from marks on film or coated paper. The web may show a flattened band, a duller surface area, a changed fiber pattern, or a local loss of loft after passing a nip, pressure roller, cleaning roller, winding contact point,

Nonwoven Tülbentlerde Neden Basınç İzleri veya Lif Sıkışması Görülür? Devamını Oku »

Kaplama ve Laminasyon Hatlarında Yüzey İzlerine Ne Sebep Olur?

What Causes Surface Marks in Coating and Laminating Lines? Surface marks on coating and laminating lines may appear as fine lines, glossy bands, dull pressure areas, coating streaks, adhesive transfer marks, or light impressions after lamination. Some marks show up while the coating is still wet. Some only become clear after drying, winding, or the

Kaplama ve Laminasyon Hatlarında Yüzey İzlerine Ne Sebep Olur? Devamını Oku »